Print Back
Quiet Operation
Helical gears reduce vibration and noise.

High Torque
High output torque is compared to spur gear planetary gear reducers.

High Efficiency
Efficiency for 1-stage model exceeds 97%; 2-stage model exceeds 94%.
Unit of Measure

Specifications

Brands

N/A Pelonis Technologies

Model

N/A 220A

Ratio

N/A 30

Output Bearing

N/A Solid Output Shaft (No Keyway)

Stage

N/A 2-Stage

Rated Output Torque (Nominal Output Torque) (T2N)

N/A 1680 N·m

Maximum Acceleration Torque (T2B)

N/A 1.8 Times of Rated Output Torque

Maximum Output Torque (Emergency Stop Torque) (T2NOT)

N/A 3 Times of Rated Output Torque

Rated Input Speed (n1N)

N/A 3000 rpm

Maximum Input Speed (n1B)

N/A 4000 rpm

Backlash

N/A ≤ 10 arc·min

Torsional Rigidity

N/A 240 N·m/arc·min

Maximum Radial Force (F2rB)

N/A 48450 N

Maximum Axial Force (F2aB)

N/A 24225 N

S5 Cycle Operation Service Life (LH)

N/A >30000 hours

S1 Continuous Operation Service Life (LH)

N/A >15000 hours

Efficiency (η)

N/A ≥ 94 %

Operating Temperature

N/A 25 to +90 ºC

Lubrication

N/A Synthetic Grease

Protection Class

N/A Ingress Protection (IP65)

Mounting Position

N/A Any

Noise Level

N/A ≤ 70 dB

Weight

N/A 59 kg

Weight Tolerance (±)

N/A 3 %

Mass Moments of Inertia

N/A 56.48 kg·cm²

Dimensions

Dimension A1

N/A 250 mm

Dimension A2

N/A 17 mm

Dimension A3

N/A 75 mm

Dimension A4

N/A 180 mm

Dimension A5

N/A 12.5 mm14.5 mm

Dimension A6

N/A M16 x P2.0

Dimension A7

N/A 20 mm

Dimension A8

N/A 79.5 mm

Dimension B1

N/A 220 mm

Dimension B2

N/A 139 mm

Dimension B3

N/A 30 mm

Dimension B4

N/A 90 mm

Dimension B5

N/A 104 mm

Dimension B6

N/A 20 mm

Dimension C1

N/A 200 mm265 mm300 mm

Dimension C2

N/A M12 M16

Dimension C3

N/A 42 mm48 mm55 mm

Dimension C4

N/A 117.5 mm119.5 mm

Dimension C5

N/A 114.3 mm230 mm250 mm

Dimension C6

N/A M10 x P1.5

Dimension C7

N/A 222 mm250 mm265 mm

Dimension C8

N/A 460.5 mm462.5 mm

Features

Features

N/A Integrated Planetary Arm Bracket
The planetary arm bracket and the output shaft are one-piece constructed to increase torsional rigidity and accuracy.

Full Needle Roller Bearings Design
The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life.

Collet Locking Mechanism
The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed.

One-Piece Helical Gear Box
The gear box and internal ring are a one-piece construction design. The speed reduction mechanism employs helical gears that provide two times the meshing rate of teeth compared to regular spur gears. It operates very smoothly, has low noise, high output torque, and low backlash