Print Back
5.0 V

Axially Grooved Bearing

0.68 CFM (0.019 m³/min)

Lead Wires: UL1007, 28 AWG, 90 mm

Operating Temperature: -10 ºC ~ +60 ºC

Operating life: 20,000 hours at 45 ºC

Locked Rotor, Auto Restart, and Polarity Protection

Frequency Generator (Tachometer) - optional

IP58 Dust and Moisture Protection

CE, RoHS Compliant
Unit of Measure

Specifications

Brands

N/A Pelonis Technologies

Type

N/A Axial Micro Blower

Direct Current (DC) Rated Voltage

N/A 5.0 V

Direct Current (DC) Operating Voltage Range

N/A 4.5~5.5 V

Rated Current

N/A 78 mA

Speed

N/A 10000 rpm

Airflow (P)

N/A 0.68 ft³/min0.019 m³/min

Static Pressure (Q)

N/A 0.166 inH2O4.21 mmAq

Noise

N/A 29.4 dBA

Operating Temperature

N/A -10~+60 ºC

Operating Life at 45 Degree Celsius (ºC) Temperature

N/A 20,000 hours

Dust and Moisture Protection

N/A Ingress Protection (IP58)

Weight

N/A 7.5 g

Industry Standards/Certifications

N/A European Conformity (CE) Restriction of Hazardous Substances (RoHS) Compliant

Dimensions

Length

N/A 26 mm1.02 in

Width

N/A 24 mm0.94 in

Height

N/A 18 mm0.71 in

Lead Wire

Lead Wire Rating

N/A Underwriters Laboratories (UL1007)

Lead Wire Thickness

N/A 28 AWG

Lead Wire Jacket Diameter

N/A 90 mm

Axial Air-Gap Cooling

Axial Air-Gap Cooling

N/A Traditional fans and blowers include silicon steel motors with radial air-gaps. Miniaturization is difficult, operation is inefficient, and power loss is greater at higher temperatures.

By using specially grooved bearings with Axial Air-Gap Technology, AIR-G Series Micro Fans and Blowers are smaller and more energy efficient than traditional fans and blowers and have almost no power loss at higher temperatures.

Applications

Applications

N/A Portable Medical Devices
Portable Computers and Electronics
Light-Emitting Diodes (LED) Lighting
Smartbooks and Tablets
Portable Hard Disk Drive (HDD)
Internet Protocol (IP) Cameras
High-Speed Memory Modules
Closed-Circuit Television (CCTV) Security Surveillance Systems
Pocket Projectors
Micro Fuel Cells
Global Positioning System (GPS) Devices
Portable Gas/Particle Detectors
Portable Plasma Generators
Portable Air-Quality Monitoring Devices
Ventilation and Defrosting
Mask/helmet/glass Ventilation
Solar and Wind Energy Devices
Fifth-Generation (5G) Communication Equipment

Axial Air-Gap Technology Vs Traditional Fan Technology

Axial Air-Gap Technology

N/A AIR-G Series Micro Fans and Blowers operate without silicon steel stack motors and have axial air-gaps that are PARALLEL to their axis. This makes them ideal miniature cooling devices.

Axial Air-Gap Characteristics
  • Low Profile
  • Energy efficient (power savings 20%~40%)
  • No silicon steel stack (no current loss)
  • Lower start-up voltage ( < 2.5V)
  • No power loss at high temperatures
  • Highly modularized production process

Traditional Fan Technology

N/A Traditional fans and blowers have silicon steel stack motors with radial air-gaps that are PERPENDICULAR to their axis. This makes miniaturization difficult.

Traditional Fan Characteristics
  • High Profile
  • Limited energy efficiency
  • Current loss caused by silicon steel stack
  • Higher start-up voltage ( > 2.5V)
  • Ingress Protection: IP55
  • Higher power loss at high temperatures
  • Complex production process