Request Information
The DTC-T series AC to DC Digital Temperature and Time Controller uses Pulse Width Modulation (PWM) to control power input, providing four settings of 25%, 50%, 75% and 100%. The temperature can be controlled within 1 ºC of the set temperature and the time/temperature can be customized and set to various levels. The output temperature varies depending on the heater device. It is small, lightweight, and easy to control.
Unit of Measure

Basic Specifications

Type

 N/A Wired

Length

 N/A 147 mm5.78 in

Width

 N/A 90 mm3.54 in

Height

 N/A 80 mm3.15 in

Exterior Material

 N/A Acrylonitrile Butadiene Styrene (ABS)

Input Voltage (AC)

 N/A 100 ~ 240 V

Output Voltage (DC)

 N/A 24 V

Control Method

 N/A On/Off

Frequency

 N/A 50 Hz60 Hz

Maximum Current

 N/A 6 A (8 A within 1 minute)

Operating Temperature

 N/A -20 ~ 55 ºC-4 to 131 ºF

Ambient Humidity

 N/A 0 ~ 80% RH

Temperature Range

 N/A 0 ~ 150 ºC32 to 302 ºF

Setting/Indication Method

 N/A Front panel digital setting; LED display

Temperature (Power) Control

 N/A 1 ~ 150 ºC (in units of 1 ºC)
Allow customized temperature range: 0 ~ 60 ºC/-30 ~ 120 ºC/20 ~ 190 ºC

Time Control

 N/A 1 ~ 99 (in units of 30 min or 1 hour) 99 = Continuous

Power Memory

 N/A EEPROM

Sampling Rate

 N/A <100 ms

Negative Temperature Coefficient (NTC)

 N/A Use Negative Temperature Coefficient (NTC) as temperature sensor (Non-insulated)

Negative Temperature Coefficient (NTC) Precision

 N/A 20 ºC ~ 60 ºC ±1 ºC; Other temperatures 2 ºC

Features

N/A

  • Easy to use; does not require additional controls or circuit design.
  • Automatically memorizes previous time and temperature settings.
  • Low electromagnetic wave, low voltage output.
  • Built-in adaptor with temperature and time setting function.
  • Customized time/temperature rotation setting.
  • More than 10,000 available specifications.
  • Can be used with various heater products.