Request Information
The DTC-A series Temperature and Time Controller series is designed for more precise heating. The temperature can be controlled within 1 ºC of the set temperature from 1 to 150 ºC with a sampling rate at 100 ms. It can be used with Ultra-Thin Flexible Heaters and other heaters for lab testing, room heating, or end product temperature control.
Unit of Measure

Basic Specifications

Type

 N/A Terminal Wired

Length

 N/A 90 mm3.54 in

Width

 N/A 65 mm2.56 in

Height

 N/A 26 mm1.02 in

Exterior Material

 N/A Acrylonitrile Butadiene Styrene (ABS)

Input Voltage (DC)

 N/A Type A: 12 ~ 24 V

Input Voltage (AC)

 N/A Type B: 100 ~ 120 VType C: 200 ~ 240 V

Output Voltage (DC)

 N/A Type A: 12 ~ 24 V

Output Voltage (AC)

 N/A Type B: 100 ~ 120 VType C: 200 ~ 240 V

Control Method

 N/A On/Off

Frequency

 N/A 60 Hz50 Hz (Available upon request)

Maximum Current (DC)

 N/A ≤10 A

Maximum Current (AC)

 N/A ≤4 A

Maximum Current (Special)

 N/A 30 A

Operating Temperature

 N/A -20 ~ 55 ºC-4 to 131 ºF

Ambient Humidity

 N/A 0 ~ 80% RH

Temperature Range

 N/A 0 ~ 150 ºC32 to 302 ºF

Setting/Indication Method

 N/A Front panel digital setting; LED display

Temperature (Power) Control

 N/A 1 ~ 150 ºC (in units of 1 ºC)
Allow customized temperature range: 0 ~ 60 ºC/-30 ~ 120 ºC/20 ~ 190 ºC

Time Control

 N/A 1 ~ 99 (in units of 30 min or 1 hour) 99 = Continuous

Power Memory

 N/A EEPROM

Sampling Rate

 N/A <100 ms

Negative Temperature Coefficient (NTC)

 N/A Use Negative Temperature Coefficient (NTC) as temperature sensor (Non-insulated)

Negative Temperature Coefficient (NTC) Precision

 N/A 20 ºC ~ 60 ºC ±1 ºC; Other temperatures 2 ºC

Features

N/A

  • Easy to use. Does not require external SSR\Relay.
  • Automatically memorizes previous time and temperature setting.
  • Timer setting available from 30 min intervals to 24 hours and continuous operation.
  • Precise temperature control within 1 ºC.
  • Both pre-wired device and connector (self-connect) device available.