Quiet Operation
Helical gears reduce vibration and noise.

High Precision
Backlash ≤ 3 arc·min reaches precision alignment.

High Rigidity and Torque
High rigidity and high torque are achieved by integrant needle roller bearings and a one-piece construction.
Unit of Measure

Specifications

Brands

N/A Pelonis Technologies

Model

N/A 180

Ratio

N/A 3

Output Bearing

N/A Solid Output Shaft (No Keyway)

Backlash Class

N/A P1

Stage

N/A 1-Stage

Rated Output Torque (Nominal Output Torque) (T2N)

N/A 1206 N·m

Maximum Acceleration Torque (T2B)

N/A 1.8 Times of Rated Output Torque

Maximum Output Torque (Emergency Stop Torque) (T2NOT)

N/A 3 Times of Rated Output Torque

Rated Input Speed (n1N)

N/A 3000 rpm

Maximum Input Speed (n1B)

N/A 4000 rpm

Backlash

N/A ≤ 6 arc·min

Torsional Rigidity

N/A 150 N·m/arc·min

Maximum Radial Force (F2rB)

N/A 17860 N

Maximum Axial Force (F2aB)

N/A 15180 N

S5 Cycle Operation Service Life (LH)

N/A >30000 hours

S1 Continuous Operation Service Life (LH)

N/A >15000 hours

Efficiency (η)

N/A ≥ 95 %

Operating Temperature

N/A -25 to +90 ºC

Lubrication

N/A Synthetic Grease

Protection Class

N/A Ingress Protection (IP65)

Mounting Position

N/A Any

Noise Level

N/A ≤ 76 dB

Weight

N/A 57.9 kg

Weight Tolerance (±)

N/A 3 %

Mass Moments of Inertia

N/A 57.65 kg·cm²

Dimensions

Dimension A1

N/A 215 mm

Dimension A2

N/A 13 mm

Dimension A3

N/A 55 mm

Dimension A4

N/A 160 mm

Dimension A5

N/A 12.5 mm14.5 mm

Dimension A6

N/A M14 x P2.0

Dimension A7

N/A 16 mm

Dimension A8

N/A 59 mm

Dimension B1

N/A 180 mm

Dimension B2

N/A 112 mm

Dimension B3

N/A 26 mm

Dimension B4

N/A 70 mm

Dimension B5

N/A 82 mm

Dimension B6

N/A 15 mm

Dimension B7

N/A 254.1 mm

Dimension B8

N/A 344.1 mm

Dimension B9

N/A 456.1 mm

Dimension C1

N/A 200 mm215 mm265 mm

Dimension C2

N/A M10 M12 M16

Dimension C3

N/A 38 mm42 mm48 mm55 mm

Dimension C4

N/A 117 mm119 mm

Dimension C5

N/A 114.3 mm180 mm230 mm

Dimension C6

N/A M10 x P1.5

Dimension C7

N/A 182 mm200 mm250 mm

Dimension C8

N/A 235 mm237 mm

Dimension C9

N/A 325 mm327 mm

Features

Features

N/A High Load-Bearing Capacity
High load-bearing capacity is achieved by a dual tapper bearing.

One-Piece Helical Gear Box
The gear box and internal ring gear are a one-piece construction design. The speed reduction mechanism employs helical gears that provide two times the meshing rate of teeth compared to regular spur gears. It operates very smoothly, has low noise, high output torque, and low backlash.

Full Needle Roller Bearings Design
The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life.

Collet Locking Mechanism
The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed.

Integrated Planetary Arm Bracket
The planetary arm bracket and the output shaft are a one-piece construction design that increases torsional rigidity and accuracy.