5.0 V

Axially Grooved Bearing

1.20 CFM (0.034 m³/min)

Lead Wires: UL1571, 32 AWG, 50 mm

Operating Temperature: -10 ºC ~ +60 ºC

Operating life: 20,000 hours at 45 ºC

Locked Rotor, Auto Restart, and Polarity Protection

Frequency Generator (Tachometer) - optional

IP58 Dust and Moisture Protection

CE, RoHS Compliant
Unit of Measure

AGB2235

Unit
Discount Price / %
1 - 10
$20.98
11 - 25
$19.58
26 - 50
$18.36
51 - 100
$17.28

Specifications

Brands

N/A Pelonis Technologies

Type

N/A Axial Micro Blower

Direct Current (DC) Rated Voltage

N/A 5.0 V

Direct Current (DC) Operating Voltage Range

N/A 4.5~5.5 V

Rated Current

N/A 80 mA

Speed

N/A 8500 rpm

Airflow (P)

N/A 1.20 ft³/min0.034 m³/min

Static Pressure (Q)

N/A 0.122 inH2O3.10 mmAq

Noise

N/A 40.0 dBA

Operating Temperature

N/A -10~+60 ºC

Operating Life at 45 Degree Celsius (ºC) Temperature

N/A 20,000 hours

Dust and Moisture Protection

N/A Ingress Protection (IP58)

Weight

N/A 12.0 g

Industry Standards/Certifications

N/A European Conformity (CE) Restriction of Hazardous Substances (RoHS) Compliant

Dimensions

Length

N/A 26 mm1.02 in

Width

N/A 24 mm0.94 in

Height

N/A 35 mm1.38 in

Lead Wire

Lead Wire Rating

N/A Underwriters Laboratories (UL1571)

Lead Wire Thickness

N/A 32 AWG

Lead Wire Jacket Diameter

N/A 50 mm

Axial Air-Gap Cooling

Axial Air-Gap Cooling

N/A Traditional fans and blowers include silicon steel motors with radial air-gaps. Miniaturization is difficult, operation is inefficient, and power loss is greater at higher temperatures.

By using specially grooved bearings with Axial Air-Gap Technology, AIR-G Series Micro Fans and Blowers are smaller and more energy efficient than traditional fans and blowers and have almost no power loss at higher temperatures.

Applications

Applications

N/A Portable Medical Devices
Portable Computers and Electronics
Light-Emitting Diodes (LED) Lighting
Smartbooks and Tablets
Portable Hard Disk Drive (HDD)
Internet Protocol (IP) Cameras
High-Speed Memory Modules
Closed-Circuit Television (CCTV) Security Surveillance Systems
Pocket Projectors
Micro Fuel Cells
Global Positioning System (GPS) Devices
Portable Gas/Particle Detectors
Portable Plasma Generators
Portable Air-Quality Monitoring Devices
Ventilation and Defrosting
Mask/helmet/glass Ventilation
Solar and Wind Energy Devices
Fifth-Generation (5G) Communication Equipment

Axial Air-Gap Technology Vs Traditional Fan Technology

Axial Air-Gap Technology

N/A AIR-G Series Micro Fans and Blowers operate without silicon steel stack motors and have axial air-gaps that are PARALLEL to their axis. This makes them ideal miniature cooling devices.

Axial Air-Gap Characteristics
  • Low Profile
  • Energy efficient (power savings 20%~40%)
  • No silicon steel stack (no current loss)
  • Lower start-up voltage ( < 2.5V)
  • No power loss at high temperatures
  • Highly modularized production process

Traditional Fan Technology

N/A Traditional fans and blowers have silicon steel stack motors with radial air-gaps that are PERPENDICULAR to their axis. This makes miniaturization difficult.

Traditional Fan Characteristics
  • High Profile
  • Limited energy efficiency
  • Current loss caused by silicon steel stack
  • Higher start-up voltage ( > 2.5V)
  • Ingress Protection: IP55
  • Higher power loss at high temperatures
  • Complex production process