3.3 V~5.0 V

Axially Grooved Bearing

0.14~0.20 CFM (0.004~0.006 m³/min)

Lead Wires: UL1571, 32 AWG, 50 mm

Operating Temperature: -10 ºC ~ +60 ºC

Operating life: 20,000 hours at 45 ºC

Locked Rotor, Auto Restart, and Polarity Protection

Frequency Generator (Tachometer) - optional

IP58 Dust and Moisture Protection

CE, RoHS Compliant
Unit of Measure

AGB184

Unit
Discount Price / %
1 - 10
$16.96
11 - 25
$15.83
26 - 50
$14.84
51 - 100
$13.97

Specifications

Brands

N/A Pelonis Technologies

Type

N/A Axial Micro Blower

Direct Current (DC) Rated Voltage

N/A 3.3~5.0 V

Direct Current (DC) Operating Voltage Range

N/A 2.8~5.5 V

Rated Current

N/A 30 Milliampere (mA) at 3.3 Volt (V) Voltage 45 Milliampere (mA) at 5.0 Volt (V) Voltage

Speed

N/A 11000 rpm at 5.0 V 7000 rpm at 3.3 V

Airflow (P)

N/A 0.004 Cubic Meter Per Minute (m³/min) at 3.3 Volt (V) Voltage 0.006 Cubic Meter Per Minute (m³/min) at 5.0 Volt (V) Voltage 0.14 Cubic Foot Per Minute (ft³/min) at 3.3 Volt (V) Voltage 0.2 Cubic Foot Per Minute (ft³/min) at 5.0 Volt (V) Voltage

Static Pressure (Q)

N/A 0.096 Inches of Water (inH2O) at 3.3 Volt (V) Voltage 0.203 Inches of Water (inH2O) at 5.0 Volt (V) Voltage 2.44 Millimetres of Aqua (mmAq) at 3.3 Volt (V) Voltage 5.16 Millimetres of Aqua (mmAq) at 5.0 Volt (V) Voltage

Noise

N/A < 35.0 Decibel (dBA) at 5.0 Volt (V) Voltage 25 Decibel (dBA) at 3.3 Volt (V) Voltage

Operating Temperature

N/A -10~+60 ºC

Operating Life at 45 Degree Celsius (ºC) Temperature

N/A 20,000 hours

Dust and Moisture Protection

N/A Ingress Protection (IP58)

Weight

N/A 1.8 g

Industry Standards/Certifications

N/A European Conformity (CE) Restriction of Hazardous Substances (RoHS) Compliant

Dimensions

Length

N/A 18 mm0.70 in

Width

N/A 18 mm0.70 in

Height

N/A 4 mm0.16 in

Lead Wire

Lead Wire Rating

N/A Underwriters Laboratories (UL1571)

Lead Wire Thickness

N/A 32 AWG

Lead Wire Jacket Diameter

N/A 50 mm

Axial Air-Gap Cooling

Axial Air-Gap Cooling

N/A Traditional fans and blowers include silicon steel motors with radial air-gaps. Miniaturization is difficult, operation is inefficient, and power loss is greater at higher temperatures.

By using specially grooved bearings with Axial Air-Gap Technology, AIR-G Series Micro Fans and Blowers are smaller and more energy efficient than traditional fans and blowers and have almost no power loss at higher temperatures.

Applications

Applications

N/A Portable Medical Devices
Portable Computers and Electronics
Light-Emitting Diodes (LED) Lighting
Smartbooks and Tablets
Portable Hard Disk Drive (HDD)
Internet Protocol (IP) Cameras
High-Speed Memory Modules
Closed-Circuit Television (CCTV) Security Surveillance Systems
Pocket Projectors
Micro Fuel Cells
Global Positioning System (GPS) Devices
Portable Gas/Particle Detectors
Portable Plasma Generators
Portable Air-Quality Monitoring Devices
Ventilation and Defrosting
Mask/helmet/glass Ventilation
Solar and Wind Energy Devices
Fifth-Generation (5G) Communication Equipment

Axial Air-Gap Technology Vs Traditional Fan Technology

Axial Air-Gap Technology

N/A AIR-G Series Micro Fans and Blowers operate without silicon steel stack motors and have axial air-gaps that are PARALLEL to their axis. This makes them ideal miniature cooling devices.

Axial Air-Gap Characteristics
  • Low Profile
  • Energy efficient (power savings 20%~40%)
  • No silicon steel stack (no current loss)
  • Lower start-up voltage ( < 2.5V)
  • No power loss at high temperatures
  • Highly modularized production process

Traditional Fan Technology

N/A Traditional fans and blowers have silicon steel stack motors with radial air-gaps that are PERPENDICULAR to their axis. This makes miniaturization difficult.

Traditional Fan Characteristics
  • High Profile
  • Limited energy efficiency
  • Current loss caused by silicon steel stack
  • Higher start-up voltage ( > 2.5V)
  • Ingress Protection: IP55
  • Higher power loss at high temperatures
  • Complex production process