| Items |
 SFL62-3-P0 Servobox Series Model SFL62 1-Stage, 3 Ratio, Standard Output Bearing, and P0 Backlash Class Planetary Reducer Gearbox |
SFL62-3-P1 Servobox Series Model SFL62 1-Stage, 3 Ratio, Standard Output Bearing, and P1 Backlash Class Planetary Reducer Gearbox |
SFL62-3-P2 Servobox Series Model SFL62 1-Stage, 3 Ratio, Standard Output Bearing, and P2 Backlash Class Planetary Reducer Gearbox |
SFL62-3N-P0 Servobox Series Model SFL62 1-Stage, 3 Ratio, Solid Output Shaft Bearing, and P0 Backlash Class Planetary Reducer Gearbox |
SFL62-3N-P1 Servobox Series Model SFL62 1-Stage, 3 Ratio, Solid Output Shaft Bearing, and P1 Backlash Class Planetary Reducer Gearbox |
|||||
| Description |
Quiet Operation Helical gears reduce vibration and noise. High Precision Backlash ≤ 3 arc·min reaches precision alignment. High Rigidity and Torque High rigidity and high torque are achieved by integrant needle roller bearings and a one-piece construction. |
|||||||||
| Brands | Pelonis Technologies | |||||||||
| Model | 62 | |||||||||
| Ratio | 3 | |||||||||
| Output Bearing | Standard (Keyway) | Standard (Keyway) | Standard (Keyway) | Solid Output Shaft (No Keyway) | Solid Output Shaft (No Keyway) | |||||
| Backlash Class | P0 | P1 | P2 | P0 | P1 | |||||
| Stage | 1-Stage | |||||||||
| Dimension A1 | 68 mm | |||||||||
| Dimension A2 | 5.5 mm | |||||||||
| Dimension A3 | 16 mm | |||||||||
| Dimension A4 | 60 mm | |||||||||
| Dimension A5 | 6 mm | |||||||||
| Dimension A6 | M5 x P0.8 | |||||||||
| Dimension A7 | 5 mm | |||||||||
| Dimension A8 | 18 mm | |||||||||
| Dimension B1 | 62 mm | |||||||||
| Dimension B2 | 48 mm | |||||||||
| Dimension B3 | 18 mm | |||||||||
| Dimension B4 | 20 mm | |||||||||
| Dimension B5 | 28 mm | |||||||||
| Dimension B6 | 6 mm | |||||||||
| Dimension B7 | 97 mm | |||||||||
| Dimension B8 | 128 mm | |||||||||
| Dimension B9 | 176 mm | |||||||||
| Dimension C1 | 70 mm75 mm90 mm | |||||||||
| Dimension C2 | M4 M5 M6 | |||||||||
| Dimension C3 | 14 mm19 mm | |||||||||
| Dimension C4 | 33.5 mm41.5 mm | |||||||||
| Dimension C5 | 50 mm60 mm70 mm | |||||||||
| Dimension C6 | M5 x P0.8 | |||||||||
| Dimension C7 | 64 mm70 mm80 mm | |||||||||
| Dimension C8 | 77 mm85 mm | |||||||||
| Dimension C9 | 108 mm116 mm | |||||||||
| Rated Output Torque (Nominal Output Torque) (T2N) | 59 N·m | |||||||||
| Maximum Acceleration Torque (T2B) | 1.8 Times of Rated Output Torque | |||||||||
| Maximum Output Torque (Emergency Stop Torque) (T2NOT) | 3 Times of Rated Output Torque | |||||||||
| Rated Input Speed (n1N) | 3000 rpm | |||||||||
| Maximum Input Speed (n1B) | 6000 rpm | |||||||||
| Backlash | ≤ 4 arc·min | ≤ 6 arc·min | ≤ 8 arc·min | ≤ 4 arc·min | ≤ 6 arc·min | |||||
| Torsional Rigidity | 8 N·m/arc·min | |||||||||
| Maximum Radial Force (F2rB) | 2240 N | |||||||||
| Maximum Axial Force (F2aB) | 1920 N | |||||||||
| S5 Cycle Operation Service Life (LH) | >30000 hours | |||||||||
| S1 Continuous Operation Service Life (LH) | >15000 hours | |||||||||
| Efficiency (η) | ≥ 95 % | |||||||||
| Operating Temperature | -25 to +90 ºC | |||||||||
| Lubrication | Synthetic Grease | |||||||||
| Protection Class | Ingress Protection (IP65) | |||||||||
| Mounting Position | Any | |||||||||
| Noise Level | ≤ 68 dB | |||||||||
| Weight | 2.7 kg | |||||||||
| Weight Tolerance (±) | 3 % | |||||||||
| Mass Moments of Inertia | 0.30 kg·cm² | |||||||||
| Features |
High Load-Bearing Capacity High load-bearing capacity is achieved by a dual tapper bearing. One-Piece Helical Gear Box The gear box and internal ring gear are a one-piece construction design. The speed reduction mechanism employs helical gears that provide two times the meshing rate of teeth compared to regular spur gears. It operates very smoothly, has low noise, high output torque, and low backlash. Full Needle Roller Bearings Design The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life. Collet Locking Mechanism The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed. Integrated Planetary Arm Bracket The planetary arm bracket and the output shaft are a one-piece construction design that increases torsional rigidity and accuracy. |
|||||||||
|
|
||||||||||
