Print Back
3.0 V~3.3 V

Axially Grooved Bearing

0.18~0.19 CFM (0.005 m³/min)

Lead Wires: UL1571, 30 AWG, 55 mm

Operating Temperature: -10 ºC ~ +60 ºC

Operating life: 20,000 hours at 45 ºC

Locked Rotor, Auto Restart, and Polarity Protection

Frequency Generator (Tachometer) - optional

IP58 Dust and Moisture Protection

CE, RoHS Compliant
Unit of Measure

Specifications

Brands

Pelonis Technologies

Type

Axial Micro Blower

Direct Current (DC) Rated Voltage

3.0~3.3 V

Direct Current (DC) Operating Voltage Range

2.5~3.6 V

Rated Current

32 Milliampere (mA) at 3.0 Volt (V) Voltage 35 Milliampere (mA) at 3.3 Volt (V) Voltage

Speed

13500 rpm at 3.0 V 14500 rpm at 3.3 V

Airflow (P)

0.005 Cubic Meter Per Minute (m³/min) at 3.0 Volt (V) Voltage 0.005 Cubic Meter Per Minute (m³/min) at 3.3 Volt (V) Voltage 0.18 Cubic Foot Per Minute (ft³/min) at 3.0 Volt (V) Voltage 0.19 Cubic Foot Per Minute (ft³/min) at 3.3 Volt (V) Voltage

Static Pressure (Q)

0.084 Inches of Water (inH2O) at 3.0 Volt (V) Voltage 0.097 Inches of Water (inH2O) at 3.3 Volt (V) Voltage 2.12 Millimetres of Aqua (mmAq) at 3.0 Volt (V) Voltage 2.47 Millimetres of Aqua (mmAq) at 3.3 Volt (V) Voltage

Noise

17.1 Decibel (dBA) at 3.0 Volt (V) Voltage 18.8 Decibel (dBA) at 3.3 Volt (V) Voltage

Operating Temperature

-10~+60 ºC

Operating Life at 45 Degree Celsius (ºC) Temperature

20,000 hours

Dust and Moisture Protection

Ingress Protection (IP58)

Weight

1.38 g

Industry Standards/Certifications

European Conformity (CE) Restriction of Hazardous Substances (RoHS) Compliant

Dimensions

Length

15 mm0.59 in

Width

15 mm0.59 in

Height

4 mm0.16 in

Lead Wire

Lead Wire Rating

Underwriters Laboratories (UL1571)

Lead Wire Thickness

30 AWG

Lead Wire Jacket Diameter

55 mm

Axial Air-Gap Cooling

Axial Air-Gap Cooling

Traditional fans and blowers include silicon steel motors with radial air-gaps. Miniaturization is difficult, operation is inefficient, and power loss is greater at higher temperatures.

By using specially grooved bearings with Axial Air-Gap Technology, AIR-G Series Micro Fans and Blowers are smaller and more energy efficient than traditional fans and blowers and have almost no power loss at higher temperatures.

Applications

Applications

AIR-G Series Micro Fans and Blowers operate without silicon steel stack motors and have axial air-gaps that are PARALLEL to their axis. This makes them ideal miniature cooling devices.

Axial Air-Gap Characteristics
  • Low Profile
  • Energy efficient (power savings 20%~40%)
  • No silicon steel stack (no current loss)
  • Lower start-up voltage ( < 2.5V)
  • No power loss at high temperatures
  • Highly modularized production process

Axial Air-Gap Technology Vs Traditional Fan Technology

Axial Air-Gap Technology

AIR-G Series Micro Fans and Blowers operate without silicon steel stack motors and have axial air-gaps that are PARALLEL to their axis. This makes them ideal miniature cooling devices.

Axial Air-Gap Characteristics
  • Low Profile
  • Energy efficient (power savings 20%~40%)
  • No silicon steel stack (no current loss)
  • Lower start-up voltage ( < 2.5V)
  • No power loss at high temperatures
  • Highly modularized production process

Traditional Fan Technology

Traditional fans and blowers have silicon steel stack motors with radial air-gaps that are PERPENDICULAR to their axis. This makes miniaturization difficult.

Traditional Fan Characteristics
  • High Profile
  • Limited energy efficiency
  • Current loss caused by silicon steel stack
  • Higher start-up voltage ( > 2.5V)
  • Ingress Protection: IP55
  • Higher power loss at high temperatures
  • Complex production process