Print Back
Quiet Operation
Grinding spiral bevel gear and Helical gears reduce vibration and noise.

High Rigidity and High Torque
High rigidity and high torque are achieved by integrant needle roller bearings and are one-piece constructed.

High Efficiency
Efficiency for 1-stage model exceeds 95%; 2-stage model exceeds 92%.
Unit of Measure

Specifications

Brands

N/A Pelonis Technologies

Model

N/A 142

Ratio

N/A 45

Output Bearing

N/A Standard (Keyway)

Stage

N/A 1-Stage

Rated Output Torque (Nominal Output Torque) (T2N)

N/A 412 N·m

Maximum Acceleration Torque (T2B)

N/A 1.8 Times of Rated Output Torque

Maximum Output Torque (Emergency Stop Torque) (T2NOT)

N/A 3 Times of Rated Output Torque

Rated Input Speed (n1N)

N/A 2500 rpm

Maximum Input Speed (n1B)

N/A 3500 rpm

Backlash

N/A ≤ 10 arc·min

Torsional Rigidity

N/A 60 N·m/arc·min

Maximum Radial Force (F2rB)

N/A 8830 N

Maximum Axial Force (F2aB)

N/A 4410 N

S5 Cycle Operation Service Life (LH)

N/A >30000 hours

S1 Continuous Operation Service Life (LH)

N/A >15000 hours

Efficiency (η)

N/A ≥ 95 %

Operating Temperature

N/A -25 to +90 ºC

Lubrication

N/A Synthetic Grease

Protection Class

N/A Ingress Protection (IP65)

Mounting Position

N/A Any

Noise Level

N/A ≤ 74 dB

Weight

N/A 24 kg

Weight Tolerance (±)

N/A 3 %

Mass Moments of Inertia

N/A 21.2 kg·cm²

Flange Model

N/A 120

Bevel Gear Reducer Model

N/A ST140

Dimensions

Dimension A1

N/A 165 mm

Dimension A2

N/A 11 mm

Dimension A3

N/A 40 mm

Dimension A4

N/A 130 mm

Dimension A5

N/A 10 mm

Dimension A6

N/A M12 x P1.75

Dimension A7

N/A 12 mm

Dimension A8

N/A 43 mm

Dimension B1

N/A 142 mm

Dimension B2

N/A 92 mm

Dimension B3

N/A 15 mm

Dimension B4

N/A 65 mm

Dimension B5

N/A 74 mm

Dimension B6

N/A 15 mm

Dimension B7

N/A 175 mm

Dimension B8

N/A 260 mm

Dimension B9

N/A 352 mm

Dimension C1

N/A 115 mm145 mm165 mm

Dimension C2

N/A M6 M8 M10

Dimension C3

N/A 28 mm32 mm35 mm

Dimension C4

N/A 68 mm

Dimension C5

N/A 95 mm110 mm130 mm

Dimension C6

N/A M8 x P1.25

Dimension C7

N/A 122 mm130 mm150 mm

Dimension C8

N/A 154 mm

Dimension C9

N/A 225 mm

Dimension D1

N/A 135 mm

Dimension D2

N/A 110 mm

Dimension D3

N/A 55 mm

Dimension D4

N/A M10 x P1.5

Features

Features

N/A Spiral Bevel Gear
The grinding spiral bevel gear has a compact structure and is excellent in transmission efficiency, stability, and durability. It has a large arc overlapping factor, is wear resistant, and has a long service life.

Integrated Planetary Arm Bracket
The planetary arm bracket and the output shaft are one-piece constructed to increase torsional rigidity and accuracy.

Full Needle Roller Bearings Design
The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life.

Collet Locking Mechanism
The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed.

One-piece Helical Gear Box
The gear box and internal ring are a one-piece construction design. The speed reduction mechanism employs helical gears that provide two times the meshing rate of teeth compared to regular spur gears. It operates very smoothly, has low noise, high output torque, and low backlash.