Quiet Operation
Helical gears reduce vibration and noise.

High Precision
Backlash ≤ 3 arc·min reaches precision alignment.

High Rigidity and Torque
High rigidity and high torque are achieved by integrant needle roller bearings and a one-piece construction.
Unit of Measure
Items
Servobox Series Model SDD 1-Stage Planetary Reducer Gearbox

Servobox Series Model SDD47 1-Stage, 4 Ratio, Standard Output Bearing, and P0 Backlash Class Planetary Reducer Gearbox

Servobox Series Model SDD 1-Stage Planetary Reducer Gearbox

Servobox Series Model SDD47 1-Stage, 4 Ratio, Standard Output Bearing, and P1 Backlash Class Planetary Reducer Gearbox

Servobox Series Model SDD 1-Stage Planetary Reducer Gearbox

Servobox Series Model SDD47 1-Stage, 4 Ratio, Standard Output Bearing, and P2 Backlash Class Planetary Reducer Gearbox

Servobox Series Model SDD 1-Stage Planetary Reducer Gearbox

Servobox Series Model SDD47 1-Stage, 5 Ratio, Standard Output Bearing, and P0 Backlash Class Planetary Reducer Gearbox

Servobox Series Model SDD 1-Stage Planetary Reducer Gearbox

Servobox Series Model SDD47 1-Stage, 5 Ratio, Standard Output Bearing, and P1 Backlash Class Planetary Reducer Gearbox
Description N/A Quiet Operation
Helical gears reduce vibration and noise.

High Precision
Backlash ≤ 3 arc·min reaches precision alignment.

High Rigidity and Torque
High rigidity and high torque are achieved by integrant needle roller bearings and a one-piece construction.
Brands N/A Pelonis Technologies
Model N/A 47
Ratio N/A 4 N/A 4 N/A 4 N/A 5 N/A 5
Output Bearing N/A Standard (Keyway)
Backlash Class N/A P0 N/A P1 N/A P2 N/A P0 N/A P1
Stage N/A 1-Stage
Dimension A1 N/A 67 mm
Number of Holes (A2) N/A 8
Dimension A2 N/A 3.4 mm
Dimension A3 N/A 28 mm
Dimension A4 N/A 47 mm
Dimension A5 N/A 12 mm
Dimension A6 N/A 72 mm
Dimension A7 N/A 20 mm
Number of Holes (A8) N/A 4
Dimension A8 N/A M3 x P0.5
Dimension A9 N/A 3 mm
Dimension B1 N/A 59 mm
Dimension B2 N/A 19.5 mm
Dimension B3 N/A 5 mm
Dimension B4 N/A 1.5 mm
Dimension B5 N/A 5 mm
Dimension B6 N/A 6.5 mm
Dimension B7 N/A 4 mm
Dimension B8 N/A 4 mm
Dimension B9 N/A 83 mm
Dimension C1 N/A 4 mm
Dimension C2 N/A 12.5 mm
Dimension C3 N/A 11 mm
Dimension C4 N/A M4 x P0.7
Dimension C5 N/A 12 mm
Dimension C6 N/A 18 mm
Dimension C7 N/A 20 mm
Dimension C8 N/A 8 mm
Rated Output Torque (Nominal Output Torque) (T2N) N/A 22 N·m N/A 22 N·m N/A 22 N·m N/A 20 N·m N/A 20 N·m
Maximum Acceleration Torque (T2B) N/A 1.8 Times of Rated Output Torque
Maximum Output Torque (Emergency Stop Torque) (T2NOT) N/A 3 Times of Rated Output Torque
Rated Input Speed (n1N) N/A 3000 rpm
Maximum Input Speed (n1B) N/A 6000 rpm
Backlash N/A ≤ 3 arc·min N/A ≤ 5 arc·min N/A ≤ 7 arc·min N/A ≤ 3 arc·min N/A ≤ 5 arc·min
Torsional Rigidity N/A 6 N·m/arc·min
Maximum Radial Force (Ball Bearing) (n2rB) N/A 2040 N
Maximum Axial Force (Ball Bearing) (n2aB) N/A 1020 N
Maximum Radial Force (Taper Bearing) (F2rB) N/A
Maximum Axial Force (Taper Bearing) (F2aB) N/A
S5 Cycle Operation Service Life (LH) N/A >30000 hours
S1 Continuous Operation Service Life (LH) N/A >15000 hours
Efficiency (η) N/A ≥ 97 %
Operating Temperature N/A -25 to +90 ºC
Lubrication N/A Synthetic Grease
Protection Class N/A Ingress Protection (IP65)
Mounting Position N/A Any
Noise Level N/A ≤ 56 dB
Weight N/A 0.71 kg
Weight Tolerance (±) N/A 3 %
Mass Moments of Inertia N/A 0.03 kg·cm²
Output Frame Dimension A1 N/A 12 mm
Output Frame Dimension A2 N/A 20 mm
Output Frame Dimension A3 N/A 28 mm
Output Frame Dimension A4 N/A 47 mm
Output Frame Dimension A5 N/A 67 mm
Output Frame Dimension B6 N/A M3 x P0.5
Output Frame Dimension B8 N/A 3 mm
Output Frame Dimension B9 N/A 3.4 mm
Features N/A One-Piece Gearbox Housing
The gearbox and internal ring gear are a one-piece construction. High gear accuracy meets DIN6 class.

Full Needle Roller Bearings Design
The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface that maximizes structural rigidity and service life.

Collet Locking Mechanism
The input-end and the motor are coupled through a collet locking mechanism that ensures concentricity and balance on the connection and no backlash for power transmission while running at high speed.

Integrated Planetary Arm Bracket
The planetary arm bracket and the output shaft are one-piece constructed to increase torsional rigidity and accuracy. The entire structure is machined for controlling accuracy in the specified tolerance.