| Items |
 FE50-3 Servobox Series Model FE50 1-Stage, 3 Ratio, and Standard Output Bearing Planetary Reducer Gearbox |
FE50-3N Servobox Series Model FE50 1-Stage, 3 Ratio, and Solid Output Shaft Output Bearing Planetary Reducer Gearbox |
FE50-4 Servobox Series Model FE50 1-Stage, 4 Ratio, and Standard Output Bearing Planetary Reducer Gearbox |
FE50-4N Servobox Series Model FE50 1-Stage, 4 Ratio, and Solid Output Shaft Output Bearing Planetary Reducer Gearbox |
FE50-5 Servobox Series Model FE50 1-Stage, 5 Ratio, and Standard Output Bearing Planetary Reducer Gearbox |
|||||
| Description |
Integrated Planetary Arm Bracket The planetary arm bracket and the output shaft are one-piece constructed to increase torsional rigidity and accuracy. The entire structure is machined for controlling accuracy in the specified tolerance. Full Needle Roller Bearings Design The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life. |
|||||||||
| Brands | Pelonis Technologies | |||||||||
| Model | 50 | |||||||||
| Ratio | 3 | 3 | 4 | 4 | 5 | |||||
| Output Bearing | Standard (Keyway) | Solid Output Shaft (No Keyway) | Standard (Keyway) | Solid Output Shaft (No Keyway) | Standard (Keyway) | |||||
| Stage | 1-Stage | |||||||||
| Dimension A1 | 42 mm | |||||||||
| Dimension A2 | M4 x P0.7 | |||||||||
| Dimension A3 | 13 mm | |||||||||
| Dimension A4 | 35 mm | |||||||||
| Dimension A5 | 5 mm | |||||||||
| Dimension A6 | M4 x P0.7 | |||||||||
| Dimension A7 | 5 mm | |||||||||
| Dimension A8 | 15 mm | |||||||||
| Diameter B1 | 50 mm | |||||||||
| Dimension B2 | 4 mm | |||||||||
| Dimension B3 | 15 mm | |||||||||
| Dimension B4 | 20 mm | |||||||||
| Dimension B5 | 25 mm | |||||||||
| Dimension B6 | 6 mm | |||||||||
| Dimension B7 | 100.5 mm | |||||||||
| Dimension C1 | 46 mm60 mm63 mm | |||||||||
| Dimension C2 | M3 M4 M5 | |||||||||
| Dimension C3 | 8 mm9 mm11 mm | |||||||||
| Dimension C4 | 26 mm | |||||||||
| Dimension C5 | 30 mm40 mm50 mm | |||||||||
| Dimension C6 | M4 x P0.7 | |||||||||
| Dimension C7 | 46 mm55 mm | |||||||||
| Rated Output Torque (Nominal Output Torque) (T2N) | 17 N·m | 17 N·m | 15 N·m | 15 N·m | 14 N·m | |||||
| Maximum Acceleration Torque (T2B) | 1.8 Times of Rated Output Torque | |||||||||
| Maximum Output Torque (Emergency Stop Torque) (T2NOT) | 3 Times of Rated Output Torque | |||||||||
| Rated Input Speed (n1N) | 3000 rpm | |||||||||
| Maximum Input Speed (n1B) | 5000 rpm | |||||||||
| Backlash | ≤ 8 arc·min | |||||||||
| Torsional Rigidity | 2.3 N·m/arc·min | |||||||||
| Maximum Radial Force (F2rB) | 750 N | |||||||||
| Maximum Axial Force (F2aB) | 325 N | |||||||||
| S5 Cycle Operation Service Life (LH) | >30000 hours | |||||||||
| S1 Continuous Operation Service Life (LH) | >15000 hours | |||||||||
| Efficiency (η) | ≥ 97 % | |||||||||
| Operating Temperature | -25 to +90 ºC | |||||||||
| Lubrication | Synthetic Grease | |||||||||
| Protection Class | Ingress Protection (IP65) | |||||||||
| Mounting Position | Any | |||||||||
| Noise Level | ≤ 62 dB | |||||||||
| Weight | 0.63 kg | |||||||||
| Weight Tolerance (±) | 3 % | |||||||||
| Mass Moments of Inertia | 0.04 kg·cm² | |||||||||
|
|
||||||||||
