Search Catalog
        
 All Categories    Servobox Series Model SN Planetary Reducer Gearboxes
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Planetary Reducer Gearboxes > Servobox Series Model SN Planetary Reducer Gearboxes > Model Number SN80-10N  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model Number SN80-10N, Servobox Series Model SN80 1-Stage, 10 Ratio, and Solid Output Shaft Output Bearing Planetary Reducer Gearbox


Servobox Series Model SN Planetary Reducer Gearboxes




Specifications  · Dimensions  · Features

Specifications

Brands
Pelonis Technologies

Model
80

Ratio
10

Output Bearing
Solid Output Shaft (No Keyway)

Stage
1-Stage

Rated Output Torque (Nominal Output Torque) (T2N)
100 N·m

Maximum Acceleration Torque (T2B)
1.8 Times of Rated Output Torque

Maximum Output Torque (Emergency Stop Torque) (T2NOT)
3 Times of Rated Output Torque

Rated Input Speed (n1N)
3000 rpm

Maximum Input Speed (n1B)
6000 rpm

Backlash
≤ 8 arc·min

Torsional Rigidity
12 N·m/arc·min

Maximum Radial Force (F2rB)
2350 N

Maximum Axial Force (F2aB)
1175 N

S5 Cycle Operation Service Life (LH)
>30000 hours

S1 Continuous Operation Service Life (LH)
>15000 hours

Efficiency (η)
≥ 97 %

Operating Temperature
-25 to +90 ºC

Lubrication
Synthetic Grease

Protection Class
Ingress Protection (IP65)

Mounting Position
Any

Noise Level
≤ 60 dB

Weight
2.1 kg

Weight Tolerance (±)
2 %

Mass Moments of Inertia
0.35 kg·cm²


Dimensions

Dimension A1
70 mm

Dimension A2
M6 x P1.0

Dimension A3
20 mm

Dimension A4
60 mm

Dimension A5
10 mm

Dimension A6
M6 x P1.0

Dimension A7
6 mm

Dimension A8
22.5 mm

Dimension B1
80 mm

Dimension B2
40 mm

Dimension B3
28 mm

Dimension B4
36 mm

Dimension B5
3 mm

Dimension B6
140.5 mm

Dimension C1
90 mm
100 mm
115 mm
145 mm

Dimension C2
M6
M8

Dimension C3
14 mm
19 mm

Dimension C4
45.5 mm

Dimension C5
70 mm
80 mm
95 mm
110 mm

Dimension C6
M5 x P0.8

Dimension C7
92 mm
110 mm
130 mm


Features
Helical Gear Design
The speed reduction mechanism employs helical gears and provides two times the meshing rate of teeth compared to regular spur gears. It also features extremely smooth operation, low noise, high torque output, and low backlash.

High Precision Gear Machining
Manufactured from high quality Ni-Cr-Mo alloy steel (SNCM220), precision machined and carbunzed to hardness 57-60 HRC. Precision teeth grinding ensures gear accuracy reaches DIN6 class.

Full Needle Roller Bearings Design
The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life.

Integrated Planetary Arm Bracket
The planetary arm bracket and the output shaft are one-piece constructed to increase torsional rigidity and accuracy.

One-piece Gear Box and Advanced Surface Treatment
The gear box and the internal ring are one-piece constructed to achieve high rigidity and high torque.

Collet Locking Mechanism
The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed.


Cooling

Heating

Motors