Search Catalog
        
 All Categories    Servobox Series Model PBT Planetary Reducer Gearboxes
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Planetary Reducer Gearboxes > Servobox Series Model PBT Planetary Reducer Gearboxes > Model Number PBT44-5  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model Number PBT44-5, Servobox Series Model PBT44 1-Stage, 5 Ratio, and Standard Output Bearing Planetary Reducer Gearbox


Quiet Operation
Grinding spiral bevel gear and Helical gears reduce vibration and noise.

High Rigidity and High Torque
High rigidity and high torque are achieved by integrant needle roller bearings and are one-piece constructed.

High Efficiency
Efficiency for 1-stage model exceeds 95%; 2-stage model exceeds 92%.




Specifications  · Dimensions  · Features

Specifications

Brands
Pelonis Technologies

Model
44

Ratio
5

Output Bearing
Standard (Keyway)

Stage
1-Stage

Rated Output Torque (Nominal Output Torque) (T2N)
14 N·m

Maximum Acceleration Torque (T2B)
1.8 Times of Rated Output Torque

Maximum Output Torque (Emergency Stop Torque) (T2NOT)
3 Times of Rated Output Torque

Rated Input Speed (n1N)
3000 rpm

Maximum Input Speed (n1B)
6000 rpm

Backlash
≤ 10 arc·min

Torsional Rigidity
3 N·m/arc·min

Maximum Radial Force (F2rB)
360 N

Maximum Axial Force (F2aB)
180 N

S5 Cycle Operation Service Life (LH)
>30000 hours

S1 Continuous Operation Service Life (LH)
>15000 hours

Efficiency (η)
≥ 95 %

Operating Temperature
-25 to +90 ºC

Lubrication
Synthetic Grease

Protection Class
Ingress Protection (IP65)

Mounting Position
Any

Noise Level
≤ 65 dB

Weight
1.2 kg

Weight Tolerance (±)
3 %

Mass Moments of Inertia
0.09 kg·cm²

Flange Model
44


Dimensions

Dimension A1
50 mm

Dimension A2
4.5 mm

Dimension A3
13 mm

Dimension A4
35 mm

Dimension A5
5 mm

Dimension A6
M4 x P0.7

Dimension A7
5 mm

Dimension A8
15 mm

Dimension B1
44 mm

Dimension B2
26 mm

Dimension B3
5 mm

Dimension B4
15 mm

Dimension B5
20 mm

Dimension B6
5 mm

Dimension B7
67.5 mm

Dimension B8
99.5 mm

Dimension B9
125.5 mm

Dimension C1
46 mm
60 mm
63 mm

Dimension C2
M3
M4
M5

Dimension C3
8 mm
11 mm

Dimension C4
26 mm

Dimension C5
30 mm
40 mm
50 mm

Dimension C6
M4 x P0.7

Dimension C7
42 mm

Dimension C8
57 mm

Dimension C9
82 mm

Dimension D1
48 mm


Features
Spiral Bevel Gear
The grinding spiral bevel gear has a compact structure and is excellent in transmission efficiency, stability, and durability. It has a large arc overlapping factor, is wear resistant, and has a long service life.

Integrated Planetary Arm Bracket
The planetary arm bracket and the output shaft are one-piece constructed to increase torsional rigidity and accuracy.

Full Needle Roller Bearings Design
The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life.

Collet Locking Mechanism
The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed.

One-piece Helical Gear Box
The gear box and internal ring are a one-piece construction design. The speed reduction mechanism employs helical gears that provide two times the meshing rate of teeth compared to regular spur gears. It operates very smoothly, has low noise, high output torque, and low backlash.


Cooling

Heating

Motors