Search Catalog
        
 All Categories    Servobox Series Model PBL Planetary Reducer Gearboxes
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Planetary Reducer Gearboxes > Servobox Series Model PBL Planetary Reducer Gearboxes > Model Number PBL120-100N  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model Number PBL120-100N, Servobox Series Model PBL120 2-Stage, 100 Ratio, and Solid Output Shaft Bearing Planetary Reducer Gearbox


Quiet Operation
Grinding spiral bevel gear & Helical gears reduce vibration and noise.

High Rigidity & High Torque
High rigidity & high torque are achieved by integrant needle roller bearings and are one-piece constructed.

High Efficiency
Efficiency for 1-stage model exceeds 95%; 2-stage model exceeds 92%.




Specifications  · Dimensions  · Features

Specifications

Brands
Pelonis Technologies

Model
120

Ratio
100

Output Bearing
Solid Output Shaft (No Keyway)

Stage
2-Stage

Rated Output Torque (Nominal Output Torque) (T2N)
246 N·m

Maximum Acceleration Torque (T2B)
1.8 Times of Rated Output Torque

Maximum Output Torque (Emergency Stop Torque) (T2NOT)
3 Times of Rated Output Torque

Rated Input Speed (n1N)
3000 rpm

Maximum Input Speed (n1B)
5000 rpm

Backlash
≤ 12 arc·min

Torsional Rigidity
27 N·m/arc·min

Maximum Radial Force (F2rB)
6460 N

Maximum Axial Force (F2aB)
3230 N

S5 Cycle Operation Service Life (LH)
>30000 hours

S1 Continuous Operation Service Life (LH)
>15000 hours

Efficiency (η)
≥ 92 %

Operating Temperature
-25 to +90 ºC

Lubrication
Synthetic Grease

Protection Class
Ingress Protection (IP65)

Mounting Position
Any

Noise Level
≤ 72 dB

Weight
12.5 kg

Weight Tolerance (±)
3 %

Mass Moments of Inertia
2.28 kg·cm²


Dimensions

Dimension A1
130 mm

Dimension A2
9 mm

Dimension A3
32 mm

Dimension A4
110 mm

Dimension A5
9 mm
23.5 mm

Dimension A6
M10 x P1.5

Dimension A7
10 mm

Dimension A8
35 mm

Dimension B1
120 mm

Dimension B2
65 mm

Dimension B3
12 mm

Dimension B4
40 mm

Dimension B5
50 mm

Dimension B6
12 mm

Dimension B7
181.6 mm

Dimension B8
266.6 mm

Dimension B9
291.6 mm

Dimension C1
90 mm
110 mm
115 mm
145 mm

Dimension C2
M5
M6
M8
M10

Dimension C3
19 mm
22 mm
24 mm

Dimension C4
53 mm
67.5 mm

Dimension C5
70 mm
80 mm
95 mm
110 mm

Dimension C6
M6 x P1.0

Dimension C7
92 mm
110 mm
130 mm

Dimension C8
115.3 mm
129.8 mm

Dimension C9
175.3 mm
189.8 mm


Features
Spiral Bevel Gear
The grinding spiral bevel gear has a compact structure and is excellent in transmission efficiency, stability, and durability. It has a large arc overlapping factor, is wear resistant, and has a long service life.

Integratory Planetary ARM Bracket
The planetary arm bracket and the output shaft are one-piece constructed to increase torsional rigidity and accuracy.

Full Needle Roller Bearings Design
The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life.

Collet Locking Mechanism
The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed.

One-Piece Helical Gear Box
The gear box and internal ring are a one-piece construction design. The speed reduction mechanism employs helical gears that provide two times the meshing rate of teeth compared to regular spur gears. It operates very smoothly, has low noise, high output torque, and low backlash.


Cooling

Heating

Motors