Search Catalog
        
 All Categories    Servobox Series Model PBL-A Planetary Reducer Gearboxes
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Planetary Reducer Gearboxes > Servobox Series Model PBL-A Planetary Reducer Gearboxes > Model Number PBL-A180A-160N  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model Number PBL-A180A-160N, Servobox Series Model PBL-A180A 2-Stage, 160 Ratio, and Solid Output Shaft Bearing Planetary Reducer Gearbox


Quiet Operation
Grinding spiral bevel gear and Helical gears reduce vibration and noise.

High Rigidity and High Torque
High rigidity and high torque are achieved by integrant needle roller bearings and are one-piece constructed.

High Efficiency
Efficiency for 1-stage model exceeds 95%; 2-stage model exceeds 92%.




Specifications  · Dimensions  · Features

Specifications

Brands
Pelonis Technologies

Model
180

Ratio
160

Output Bearing
Solid Output Shaft (No Keyway)

Stage
2-Stage

Rated Output Torque (Nominal Output Torque) (T2N)
942 N·m

Maximum Acceleration Torque (T2B)
1.8 Times of Rated Output Torque

Maximum Output Torque (Emergency Stop Torque) (T2NOT)
3 Times of Rated Output Torque

Rated Input Speed (n1N)
3000 rpm

Maximum Input Speed (n1B)
4000 rpm

Backlash
≤ 12 arc·min

Torsional Rigidity
140 N·m/arc·min

Maximum Radial Force (F2rB)
14820 N

Maximum Axial Force (F2aB)
7410 N

S5 Cycle Operation Service Life (LH)
>30000 hours

S1 Continuous Operation Service Life (LH)
>15000 hours

Efficiency (η)
≥ 92 %

Operating Temperature
-25 to +90 ºC

Lubrication
Synthetic Grease

Protection Class
Ingress Protection (IP65)

Mounting Position
Any

Noise Level
≤ 76 dB

Weight
52.4 kg

Weight Tolerance (±)
3 %

Mass Moments of Inertia
48.7 kg·cm²


Dimensions

Dimension A1
215 mm

Dimension A2
13 mm

Dimension A3
55 mm

Dimension A4
160 mm

Dimension A5
12.5 mm
14.5 mm

Dimension A6
M14 x P2.0

Dimension A7
16 mm

Dimension A8
59 mm

Dimension B1
180 mm

Dimension B2
106 mm

Dimension B3
20 mm

Dimension B4
70 mm

Dimension B5
82 mm

Dimension B6
16 mm

Dimension B7
304.6 mm

Dimension B8
394.6 mm

Dimension B9
500.6 mm

Dimension C1
200 mm
215 mm
265 mm

Dimension C2
M10
M12
M16

Dimension C3
38 mm
42 mm
48 mm
55 mm

Dimension C4
117 mm
119 mm

Dimension C5
114.3 mm
180 mm
230 mm

Dimension C6
M10 x P1.5

Dimension C7
182 mm
200 mm
250 mm

Dimension C8
235 mm
237 mm

Dimension C9
325 mm
327 mm


Features
Spiral Bevel Gear
The grinding spiral bevel gear has a compact structure and is excellent in transmission efficiency, stability, and durability. It has a large arc overlapping factor, is wear resistant, and has a long service life.

Integrated Planetary Arm Bracket
The planetary arm bracket and the output shaft are one-piece constructed to increase torsional rigidity and accuracy.

Full Needle Roller Bearings Design
The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life.

Collet Locking Mechanism
The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed.

One-piece Helical Gear Box
The gear box and internal ring are a one-piece construction design. The speed reduction mechanism employs helical gears that provide two times the meshing rate of teeth compared to regular spur gears. It operates very smoothly, has low noise, high output torque, and low backlash.


Cooling

Heating

Motors