Search Catalog
        
 All Categories    Servobox Series Model FA Planetary Reducer Gearboxes
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Planetary Reducer Gearboxes > Servobox Series Model FA Planetary Reducer Gearboxes > Model Number FA180-5N  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model Number FA180-5N, Servobox Series Model FA180 1-Stage, 5 Ratio, and Solid Output Shaft Output Bearing Planetary Reducer Gearbox


Quiet Operation
Grinding spiral bevel gear and Helical gears reduce vibration and noise.

High Rigidity and High Torque
High rigidity and high torque are achieved by integrant needle roller bearings and are one-piece constructed.




Specifications  · Dimensions  · Features

Specifications

Brands
Pelonis Technologies

Model
180

Ratio
5

Output Bearing
Solid Output Shaft (No Keyway)

Stage
1-Stage

Rated Output Torque (Nominal Output Torque) (T2N)
1050 N·m

Maximum Acceleration Torque (T2B)
1890 N·m

Maximum Output Torque (Emergency Stop Torque) (T2NOT)
3 Times of Rated Output Torque

Rated Input Speed (n1N)
3000 rpm

Maximum Input Speed (n1B)
5000 rpm

Backlash
≤ 8 arc·min

Torsional Rigidity
140 N·m/arc·min

Maximum Radial Force (F2rB)
14800 N

Maximum Axial Force (F2aB)
7400 N

S5 Cycle Operation Service Life (LH)
>30000 hours

S1 Continuous Operation Service Life (LH)
>15000 hours

Efficiency (η)
≥ 97 %

Operating Temperature
-25 to +90 ºC

Lubrication
Synthetic Grease

Protection Class
Ingress Protection (IP65)

Mounting Position
Any

Noise Level
≤ 70 dB

Weight
33 kg

Weight Tolerance (±)
2 %

Mass Moments of Inertia
23.3 kg·cm²


Dimensions

Dimension A1
215 mm

Dimension A2
M14 x P2.0

Dimension A3
55 mm

Dimension A4
160 mm

Dimension A5
9.5 mm

Dimension A6
M10 x P1.5

Dimension A7
16 mm

Dimension A8
59 mm

Dimension B1
180 mm

Dimension B2
106 mm

Dimension B3
16 mm

Dimension B4
201.5 mm
204.5 mm

Dimension B5
70 mm

Dimension B6
82 mm

Dimension B7
20 mm

Dimension B8
323.5 mm
326.5 mm

Dimension C1
149 mm
200 mm
215 mm
265 mm
300 mm

Dimension C2
M8
M12
M16

Dimension C3
38 mm
42 mm
48 mm
55 mm

Dimension C4
114.5 mm
117.5 mm

Dimension C5
114.3 mm
180 mm
230 mm
250 mm

Dimension C6
M10 x P1.5

Dimension C7
182 mm
200 mm
250 mm
265 mm


Features
Helical Gear Design
The speed reduction mechanism employs helical gears and provides two times the meshing rate of teeth compared to regular spur gears. It also features extremely smooth operation, low noise, high torque output, and low backlash.

High Precision Gear Machining
Manufactured from high quality Ni-Cr-Mo alloy steel (SNCM220), precision machined and carbonized to hardness 57-60 HRC. Precision teeth grinding ensures gear accuracy reaches DIN6 class.

Full Needle Roller Bearings Design
The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life.

Integrated Planetary Arm Bracket
The planetary arm bracket and the output shaft are one-piece constructed to increase torsional rigidity and accuracy.

One-piece Gear Box and Advanced Surface Treatment
The gear box and the internal ring are one-piece constructed to achieve high rigidity and high torque.

Collet Locking Mechanism
The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed.


Cooling

Heating

Motors