Cooling
Fans
Blowers
Cross Flow Fans
Backward Curve Centrifugal Fans
Forward Curve Centrifugal Fans
HVAC Axial Fans
Inline Fans
Automotive Fans
Heating
PTC Heaters
Ultra Thin Flexible Heaters
Motors
All Products
Menu
Search
Products
/
About
/
Resources
/
Blog
/
Contact
/
(US) 888-546-0524
Innovation in Motion
Search Catalog
By Keyword
By Model Number
All Categories
Micro Fans and Micro Blowers
Shopping Cart
0 Items
Request for Quote
0 Items
All Categories
>
AIR-G Series Micro Fans and Micro Blowers
>
Micro Fans and Micro Blowers
>
Model Number AGB304H
Printable Page
Email This Page
Save To Favorites
Please wait…
Model Number AGB304H, 0.87 Cubic Feet Per Minute (ft³/min) Airflow (P) Micro Blower
List Price $17.86
(
Quantity Discount
Available )
larger image
3.3 V~5.0 V
Axially Grooved Bearing
0.87~1.15 CFM (0.025~0.033 m³/min)
Lead Wires: UL1571, 32 AWG, 50 mm
Operating Temperature: -10 ºC ~ +60 ºC
Operating life: 20,000 hours at 45 ºC
Locked Rotor, Auto Restart, and Polarity Protection
Frequency Generator (Tachometer) - optional
IP58 Dust and Moisture Protection
CE, RoHS Compliant
Specifications
·
Dimensions
·
Lead Wire
·
Axial Air-Gap Cooling
·
Applications
·
Axial Air-Gap Technology Vs Traditional Fan Technology
Specifications
Brands
Pelonis Technologies
Type
Axial
Micro Blower
Direct Current (DC) Rated Voltage
3.3~5.0
V
Direct Current (DC) Operating Voltage Range
2.8~5.5
V
Rated Current
140 Milliampere (mA) at 5.0 Volt (V) Voltage
90 Milliampere (mA) at 3.3 Volt (V) Voltage
Speed
11000 rpm at 5.0 V
8500 rpm at 3.3 V
Airflow (P)
0.025 Cubic Meter Per Minute (m³/min) at 3.3 Volt (V) Voltage
0.033 Cubic Meter Per Minute (m³/min) at 5.0 Volt (V) Voltage
0.87 Cubic Foot Per Minute (ft³/min) at 3.3 Volt (V) Voltage
1.15 Cubic Foot Per Minute (ft³/min) at 5.0 Volt (V) Voltage
Static Pressure (Q)
0.263 Inches of Water (inH
2
O) at 3.3 Volt (V) Voltage
0.484 Inches of Water (inH
2
O) at 5.0 Volt (V) Voltage
12.29 Millimetres of Aqua (mmAq) at 5.0 Volt (V) Voltage
6.67 Millimetres of Aqua (mmAq) at 3.3 Volt (V) Voltage
Noise
25.9 Decibel (dBA) at 3.3 Volt (V) Voltage
32.6 Decibel (dBA) at 5.0 Volt (V) Voltage
Operating Temperature
-10~+60
ºC
Operating Life at 45 Degree Celsius (ºC) Temperature
20,000
hours
Dust and Moisture Protection
Ingress Protection (IP58)
Weight
4.6
g
Industry Standards/Certifications
European Conformity (CE)
Restriction of Hazardous Substances (RoHS) Compliant
Dimensions
Length
30
mm
1.18
in
Width
30
mm
1.18
in
Height
4
mm
0.16
in
Lead Wire
Lead Wire Rating
Underwriters Laboratories (UL1571)
Lead Wire Thickness
32
AWG
Lead Wire Jacket Diameter
50
mm
Axial Air-Gap Cooling
Traditional fans and blowers include silicon steel motors with radial air-gaps. Miniaturization is difficult, operation is inefficient, and power loss is greater at higher temperatures.
By using specially grooved bearings with Axial Air-Gap Technology, AIR-G Series Micro Fans and Blowers are smaller and more energy efficient than traditional fans and blowers and have almost no power loss at higher temperatures.
Applications
Portable Medical Devices
Portable Computers and Electronics
Light-Emitting Diodes (LED) Lighting
Smartbooks and Tablets
Portable Hard Disk Drive (HDD)
Internet Protocol (IP) Cameras
High-Speed Memory Modules
Closed-Circuit Television (CCTV) Security Surveillance Systems
Pocket Projectors
Micro Fuel Cells
Global Positioning System (GPS) Devices
Portable Gas/Particle Detectors
Portable Plasma Generators
Portable Air-Quality Monitoring Devices
Ventilation and Defrosting
Mask/helmet/glass Ventilation
Solar and Wind Energy Devices
Fifth-Generation (5G) Communication Equipment
Axial Air-Gap Technology Vs Traditional Fan Technology
Axial Air-Gap Technology
AIR-G Series Micro Fans and Blowers operate without silicon steel stack motors and have axial air-gaps that are PARALLEL to their axis. This makes them ideal miniature cooling devices.
Axial Air-Gap Characteristics
Low Profile
Energy efficient (power savings 20%~40%)
No silicon steel stack (no current loss)
Lower start-up voltage ( < 2.5V)
No power loss at high temperatures
Highly modularized production process
Traditional Fan Technology
Traditional fans and blowers have silicon steel stack motors with radial air-gaps that are PERPENDICULAR to their axis. This makes miniaturization difficult.
Traditional Fan Characteristics
High Profile
Limited energy efficiency
Current loss caused by silicon steel stack
Higher start-up voltage ( > 2.5V)
Ingress Protection: IP55
Higher power loss at high temperatures
Complex production process
MORE IMAGES
·
Traditional Fan Technology Vs Axial Air-Gap Technology
·
0.87 Cubic Feet Per Minute (ft³/min) Airflow (P) Micro Blower - Dimensional Drawing
·
0.87 Cubic Feet Per Minute (ft³/min) Airflow (P) Micro Blower - Airflow (P) Vs Pressure (Q) Graph
VIEW CAD DRAWING
·
3D
Cooling
Heating
Motors