Search Catalog
        
 All Categories    Micro Fans and Micro Blowers
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > AIR-G Series Micro Fans and Micro Blowers > Micro Fans and Micro Blowers > Model Number AGB304  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model Number AGB304, 0.57 Cubic Feet Per Minute (ft³/min) Airflow (P) Micro Blower
List Price $17.86 ( Quantity Discount Available )


3.3 V~5.0 V

Axially Grooved Bearing

0.57~0.87 CFM (0.016~0.025 m³/min)

Lead Wires: UL1571, 32 AWG, 50 mm

Operating Temperature: -10 ºC ~ +60 ºC

Operating life: 20,000 hours at 45 ºC

Locked Rotor, Auto Restart, and Polarity Protection

Frequency Generator (Tachometer) - optional

IP58 Dust and Moisture Protection

CE, RoHS Compliant




Specifications  · Dimensions  · Lead Wire  · Axial Air-Gap Cooling  · Applications  · Axial Air-Gap Technology Vs Traditional Fan Technology

Specifications

Brands
Pelonis Technologies

Type
Axial
Micro Blower

Direct Current (DC) Rated Voltage
3.3~5.0 V

Direct Current (DC) Operating Voltage Range
2.8~3.6 Volt (V) at 3.3 Volt (V) Voltage
4.5~5.5 Volt (V) at 5.0 Volt (V) Voltage

Rated Current
50 Milliampere (mA) at 3.3 Volt (V) Voltage
75 Milliampere (mA) at 5.0 Volt (V) Voltage

Speed
6000 rpm at 3.3 V
8500 rpm at 5.0 V

Airflow (P)
0.016 Cubic Meter Per Minute (m³/min) at 3.3 Volt (V) Voltage
0.025 Cubic Meter Per Minute (m³/min) at 5.0 Volt (V) Voltage
0.57 Cubic Foot Per Minute (ft³/min) at 3.3 Volt (V) Voltage
0.87 Cubic Foot Per Minute (ft³/min) at 5.0 Volt (V) Voltage

Static Pressure (Q)
0.115 Inches of Water (inH2O) at 3.3 Volt (V) Voltage
0.263 Inches of Water (inH2O) at 5.0 Volt (V) Voltage
2.91 Millimetres of Aqua (mmAq) at 3.3 Volt (V) Voltage
6.67 Millimetres of Aqua (mmAq) at 5.0 Volt (V) Voltage

Noise
28 Decibel (dBA) at 3.3 Volt (V) Voltage
36 Decibel (dBA) at 5.0 Volt (V) Voltage

Operating Temperature
-10~+60 ºC

Operating Life at 45 Degree Celsius (ºC) Temperature
20,000 hours

Dust and Moisture Protection
Ingress Protection (IP58)

Weight
4.6 g

Industry Standards/Certifications
European Conformity (CE)
Restriction of Hazardous Substances (RoHS) Compliant


Dimensions

Length
30 mm
1.18 in

Width
30 mm
1.18 in

Height
4 mm
0.16 in


Lead Wire

Lead Wire Rating
Underwriters Laboratories (UL1571)

Lead Wire Thickness
32 AWG

Lead Wire Jacket Diameter
50 mm


Axial Air-Gap Cooling
Traditional fans and blowers include silicon steel motors with radial air-gaps. Miniaturization is difficult, operation is inefficient, and power loss is greater at higher temperatures.

By using specially grooved bearings with Axial Air-Gap Technology, AIR-G Series Micro Fans and Blowers are smaller and more energy efficient than traditional fans and blowers and have almost no power loss at higher temperatures.


Applications
Portable Medical Devices
Portable Computers and Electronics
Light-Emitting Diodes (LED) Lighting
Smartbooks and Tablets
Portable Hard Disk Drive (HDD)
Internet Protocol (IP) Cameras
High-Speed Memory Modules
Closed-Circuit Television (CCTV) Security Surveillance Systems
Pocket Projectors
Micro Fuel Cells
Global Positioning System (GPS) Devices
Portable Gas/Particle Detectors
Portable Plasma Generators
Portable Air-Quality Monitoring Devices
Ventilation and Defrosting
Mask/helmet/glass Ventilation
Solar and Wind Energy Devices
Fifth-Generation (5G) Communication Equipment


Axial Air-Gap Technology Vs Traditional Fan Technology

Axial Air-Gap Technology
Traditional fans and blowers have silicon steel stack motors with radial air-gaps that are PERPENDICULAR to their axis. This makes miniaturization difficult.

Traditional Fan Characteristics
  • High Profile
  • Limited energy efficiency
  • Current loss caused by silicon steel stack
  • Higher start-up voltage ( > 2.5V)
  • Ingress Protection: IP55
  • Higher power loss at high temperatures
  • Complex production process

Traditional Fan Technology
Traditional fans and blowers have silicon steel stack motors with radial air-gaps that are PERPENDICULAR to their axis. This makes miniaturization difficult.

Traditional Fan Characteristics
  • High Profile
  • Limited energy efficiency
  • Current loss caused by silicon steel stack
  • Higher start-up voltage ( > 2.5V)
  • Ingress Protection: IP55
  • Higher power loss at high temperatures
  • Complex production process


 MORE IMAGES 

·  Traditional Fan Technology Vs Axial Air-Gap Technology

·  0.57 Cubic Feet Per Minute (ft³/min) Airflow (P) Micro Blower - Dimensional Drawing

·  0.57 Cubic Feet Per Minute (ft³/min) Airflow (P) Micro Blower - Airflow (P) Vs Pressure (Q) Graph



Cooling

Heating

Motors